Professional Drain Cleaning Services in Formby

A Step-by-Step Guide to Replacing an Electric Shower Safety First Before you start, make sure to turn off the electricity at the circuit breaker to prevent any accidents. It's also a good idea to have the necessary tools and replacement parts on hand. If you're unsure about any step, it's advisable to consult a professional Liverpool Plumber. Remove the Old Shower • Turn off the water supply to the shower. • Remove the front cover. • Disconnect the electrical connections, ensuring that the power is turned off. • Loosen and disconnect the water supply pipes using an adjustable wrench. • Remove the old shower unit from the wall. Prepare the Wall • If the new shower is a different size, you might need to drill new holes or make adjustments to the mounting area on the wall. • Use a spirit level to ensure the new unit is properly aligned. Install the New Shower • Connect the water supply pipes to the new unit. Use PTFE tape to ensure a watertight seal. • Attach the electrical wires to the corresponding terminals. • If the power cable is not long enough, you may need to install a new cable. Make sure the cable is rated for the shower's power requirements. • Seal around the unit with waterproof sealant to prevent water from getting behind the unit. Test • Turn on the water supply and check for any leaks. • Turn on the electricity at the circuit breaker and test the new shower to ensure it heats water properly. • Replace the front cover of the shower. • Job Done.