Expert Laminate and Vinyl Flooring Contractors in Bellshill

Yes but because the tiles will experience extremes of temperature, High Temperature or epoxy adhesive must be used. Tiles must be acclimatised to room temperature before installation and then maintained at a constant temperature while the adhesive cures, which will take several hours. It may be necessary to protect the room from direct sunlight by covering the windows.

Flooring manufacturers recommend that the temperature should be maintained for at least 24hours after the installation has ben completed. After this time it is important to note that if there are any large changes in temperature, the floor tiles may still be liable to expand or contract. We recommend that the floor should not be allowed to cool below 13C during its service life.

Floating floors are often found in rooms or conservatories, must be overlaid with 6mm flooring grade plywood fixed in accordance with BS8203 " the code of practice for installation of resilient flooring" Any gaps, gouges and joints between boards must be filled using an appropriate smoothing compound.

This will depend on the adhesive used and the site conditions, particularly temperature but it is generally okay to walk on the floor 8-10 hours but try to keep movements to a minimum for the first day. Furniture should not be moved in for at least 24hours, remember to apply felt pads to the furniture.

Yes, providing the surface temperature does not exceed 27C (81F). Remember to switch of the heating for 48hours before installation, during installation and 48hours after the installation has been completed. If the heating system is regularly turned up and down use high temperature or epoxy adhesive should be used to avoid potential gapping.