Overview: Garage Door Repair & Installation
People here say garage door, not garage door opener, and the firms in this category fit and repair the door as well as the electric operator that moves it. Three types cover most houses. The old up and over swings out as it lifts, so it needs clear space in front and should never sweep over a pavement. A roller shutter coils into a box above the opening and suits a short driveway. A sectional door lifts straight up in panels and seals the opening better than either.
What fails depends on the type. Up and over doors go through springs, cables and worn pivot arms, and spares for older doors can be hard to find, which is often what tips a repair into a replacement. Roller doors fail at the motor, the manual override or the curtain slats. Springs on any of them are under real tension and are not a job to attempt at home.
If you are adding an operator to an existing door, ask about the safety features that stop it closing on someone, and about how you get in when the power is off.
Use the region and town lists below to find garage door firms covering your area.
Garage doors and automation costs in the UK
Separate a door repair, replacement door and motor retrofit. Check the opening size, existing door condition and whether electrical supply, removal and safety commissioning are included.
| Job or service | Guide price | Scope |
|---|---|---|
| Garage door service and adjustment | £80–£150per visit | One manual or powered domestic door with no replacement parts required.Routine inspection, lubrication and adjustment of one door. Replacement parts and an emergency call-out are extra.What is included?Included: Inspection; Agreed lubrication and adjustment Not included: Parts; Motor replacement |
| Replace garage door cables and cones | £160–£330per completed repair | One standard single up-and-over garage door with an identified cable fault, a compatible cable-and-cone set and normal weekday attendance.Includes an allowance for normal attendance. Ask whether a diagnostic call-out is credited against the repair.What is included?Included: Compatible cables and cones; Weekday attendance and fitting; Balance and operation checks Not included: New springs or a complete door; Emergency attendance |
| New manual up-and-over door | £850–£1,500per installed door | One white steel manual up-and-over door and frame for an approximately 2.3 m × 2.1 m single opening, with suitable existing structure.What is included?Included: Specified door and frame; Installation; Old-door removal Not included: Structural alterations; Automation |
| New powered sectional door | £1,800–£3,400per installed door | One standard single insulated steel sectional door, approximately 2.3 m × 2.1 m, with a compatible electric operator and suitable power nearby.Includes the door, operator and commissioning. Confirm panel thickness, safety features, old-door removal and whether any new power supply is needed.What is included?Included: Door and motor; Installation; Safety commissioning Not included: New electrical circuit; Structural alterations |
| Motor retrofit to a suitable existing door | £480–£750per installed system | One compatible existing single garage door in sound condition, with suitable power already available, standard operator, controls and any ordinary conversion arm specified.For a compatible door that already moves freely. Repairs, battery operation or a new electrical supply are additional.What is included?Included: Specified motor and controls; Installation; Safety commissioning Not included: New door; Electrical supply work |
What changes the price?
- Size and construction. Non-standard openings, insulation and finishes change equipment cost.
- Door condition. A motor retrofit may require door repairs or prove unsuitable.
- Complete installation. Power, disposal, controls and safety devices must be specified.
Ask before you accept a quote
- Is my existing door suitable for automation without extra repair?Check whether retrofit is a realistic comparison.
- Does the fitted price include the frame, controls, removal and commissioning?Identify missing parts of the installation.
- What warranty and servicing conditions apply to the door and motor?Compare the cost of ownership.
A practical way to control the cost
Request a repair or motor-retrofit option alongside replacement only after the existing door has been assessed for suitability.
Frequently asked questions
Why does the motor run without lifting the door?
Usually a broken spring or a snapped cable. Release the operator using the manual override and try the door by hand. A door in balance lifts with light effort and stays put; a door with a failed spring is far too heavy and may drop. Look for a split in the spring or a cable hanging loose, then leave it alone and get a repairer out.
Can I change a broken spring myself?
No. The springs on both up and over and sectional doors are under serious tension, and the tools and the technique are not something to improvise. Cables can whip when they let go. Firms doing this every day have the right spring sizes on the van and will set the balance properly afterwards, which is half the job and the half nobody sees.
How do I check the door will not close on someone?
An automatic door has to detect an obstruction and stop or reverse. Close it onto something soft and see what happens, and if the door has safety beams across the opening, break the beam as it closes and watch it reverse. Force settings can be turned up by a previous owner to mask a balance problem, which makes the door dangerous rather than fixed.
When is a whole new door the answer?
When spares for an older up and over door are no longer available, which happens sooner than people expect, or when the frame the door hangs on has rotted or rusted. Impact damage to a roller curtain is another one. A modern sectional or roller door usually seals and insulates far better than what it replaces, and it takes up less room on the drive.
Which opener drive should I choose?
Operators here are usually a belt or chain unit on the ceiling, or a motor built into a roller door. Belt units are quieter, which matters in an attached garage under a bedroom. Ask about the manual release and where the emergency key is kept, because a garage with no side door and no power is a genuine nuisance.