Trusted Elevator Services in Newbury

Our platform lifts use patented screw and nut technology to drive the lift. A large threaded bar is positioned behind the panels of the back of the lift, and a large nut (attached to the platform) is moved up and down the threaded bar using a quiet, energy efficient motor. The platform moves up and down with the nut using single phase power.

Yes the lift comes with a prefabricated shaft that is also a structural element to the lift. If you have an existing shaft, we can build within this space.

The landings must be level and provide a fixing point (usually timber) for the bottom door frame. Gartec use a series of L brackets and support hoops to secure the lift.

The finished floor height must be provided to the engineers at the beginning of the installation. If floor finish, such as carpet, tiles or wood is not in place when installation takes place our installers can set the door frame at the required height for the area surrounding the lift to be made good post installation.

Once your lift has been installed our team will take you through a demonstration of the operation and emergency release procedures. If for any reason you are not available the day your installation is completed an additional visit can be arranged on date to suit you and your family, and we have a video series which shows basic operation and emergency procedures should you need a reminder later on.